TEIN EDFC5 Controller Kit
The TEIN EDFC5 lets you adjust the damping force of compatible TEIN suspension systems electronically while driving. The system combines comfort-oriented driving with quick response and sporty vehicle control. In addition to manual adjustment, EDFC5 offers several automatic control strategies that take speed, longitudinal and lateral acceleration, and rapid changes in vehicle movement into account.
Part number: EDK04-R6655
Weight: 2,4 kg
Package dimensions: 32,5 × 14,5 × 24,5 cm
Key features
- Automatic damping force control based on rapid changes in vehicle movement
- AI-powered learning function that adapts to driving style and conditions
- Automatic control based on longitudinal and lateral acceleration
- Speed-dependent damping force control
- Manual damping force adjustment via a central rotary dial
- Up to 10 storable setups
- Combinable automatic control modes
- 16-, 32-, 64-, or 96-step adjustment
- Wireless communication between controller and motor drive units
- VA-LCD with improved readability
- Individually adjustable display, button, and dial lighting
- Automatic brightness adjustment
- Self-diagnostics for motor control units and wireless connection
Response-based damping force control
EDFC5 detects not only the current G-force, but also how quickly it changes. This allows the system to respond immediately as steering, braking, or acceleration begins. When driving straight, the damping can remain soft for comfort. As soon as the vehicle turns, accelerates, or decelerates, the damping force is adjusted automatically to reduce vehicle movement and improve response.
After the initial response, the system can shift back toward greater comfort. This combines a direct response and good bump absorption with composed handling.
AI learning function
The learning function analyzes driving behavior and adapts response-based control to different driving situations. These include city traffic, highways, winding country roads, and track driving. The goal is to adjust damping force as naturally as possible without intrusive or inappropriate interventions.
Longitudinal and lateral acceleration control
During acceleration and deceleration, EDFC5 can automatically increase damping force to reduce vehicle pitch. During steady driving, a softer setting can be used for greater comfort.
In corners, adjustment is based on lateral acceleration. This allows the damping to remain comfortable when driving straight and become firmer only when turning in. The balance between the front and rear axles can also be adjusted to specifically influence handling.
Speed-dependent control
Damping force can be adjusted automatically according to vehicle speed. For example, a softer setting for city driving can be used at low speeds, while a firmer setting for greater stability can be selected at higher speeds.
A speed signal is required for speed-dependent control. If this cannot be obtained from the vehicle, or if you want to use all functions, the separately available GPS kit is required.
Manual mode and memory function
In manual mode, the damping force levels for the front and rear axles are set using a central rotary knob. Up to ten different setups can be saved and recalled directly as needed.
Combined control
Reaction-based control, G-force control, and speed-dependent control can be combined. This allows damping force to be comprehensively adjusted to driving conditions, speed, and vehicle movement.
Quieter motor operation
The motor control has been revised compared with earlier EDFC systems. According to TEIN, the operating noise of the actuators can be reduced to approximately one-third. Existing compatible EDFC motors can still be used.
Wireless installation
The controller communicates wirelessly with the motor driver units. This means no control wires need to be routed from the passenger compartment through the firewall or into the trunk. The motor driver units are designed for installation outside the cabin and have a dust- and water-resistant housing.
Fine damping force adjustment
EDFC5 offers a choice of 16, 32, 64, or 96 adjustment levels. For many TEIN dampers that originally had 16 manual levels, this allows for significantly finer electronic adjustment within the same adjustment range.
Display and controls
- Wide VA display with a 22 × 60 mm display area
- Single-knob operation by turning and pressing
- Two additional buttons for mode and display
- 262,000 adjustable lighting colors
- Four preset colors: white, green, amber, and blue
- Automatic adjustment of display and button brightness based on ambient light
- Two selectable viewing angles
- Adjustable button and signal volume from 0 to 3
- Lock function to prevent unintended input while driving
Additional connections and functions
The controller has two inputs for external signals. This allows stored damper settings to be activated, for example, via a separate switch or an existing vehicle signal.
The minimum speed for G-force- and response-based control can be set from 0 to 50 km/h. The integrated three-axis acceleration sensor allows flexible installation of the controller.
Compatible TEIN suspensions
EDFC5 can only be used with TEIN shock absorbers designed for it. Depending on the configuration, these include:
- EnduraPro HC PLUS
- EnduraPro PLUS
- 4x4 DAMPER GRAVEL
- 4x4 DAMPER SPORT
- FLEX Z
- STREET ADVANCE Z
- MONO RACING
Actual compatibility depends on the vehicle model, suspension and adjustment mechanism configuration.
Items included and additional components required
This item is the EDFC5 Controller Kit EDK04-R6655. An EDFC Motor Kit suitable for the vehicle and suspension is also required for a complete system.
Depending on the vehicle and installation, the following components may also be required:
- EDFC Motor Kit
- GPS Kit EDK07-P8022
- Strut Kit EDK06-K4474
- Motor Extension Kit
- additional motor driver units EDC01-R6654
- additional power or motor cables
Note: The motor driver unit of the EDFC Active Pro is not compatible with EDFC5. The compatible unit EDC01-R6654 must be used with EDFC5.
Separate compression and rebound adjustment
With compatible shock absorbers, EDFC5 can control up to eight motors and adjust compression and rebound separately. Additional motor kits, motor driver units and cables are required. Compression and rebound settings can be shown simultaneously on the display and adjusted separately.

