1
of
4
Loading...
EMU Black
Regular price
825,00 €
Unit price
/
Unavailable
SPECIFICATION
GENERAL | |
| Temperature range | AECQ100 GRADE2 (-40 to +105˚C) |
| Reverse battery protection | Yes, internal |
| Operating voltage | 6-22V, immunity to transients according to ISO 7637 |
| Enclosure | IP 60, custom CNC machined aluminium |
| Size (mm) and weight (g) | 150x72x31, 390 |
| connectors | 1x24, 1x39 FCI automotive connector |
| PC communication | USB (with PC client software), serial, CAN |
OUTPUTS | |
| injector outputs | 6 protected outputs 5A, low side |
| Ignition outputs | 6 outputs 7A(15A peak) (passive & active coils supported) |
| auxiliary outputs | 6 protected outputs 5A, low side |
| Other outputs | Full bridge up to 7A, can be used as separate outputs or 2 H-Bridges |
| WBO heater | Protected low side up to 5A |
| communications | Serial, CANBUS 2.0B |
INPUTS | |
| Analog inputs | 9 inputs, resolution 10 bits, 0-5V (protected) |
| EGT inputs | 2 for K-Type thermocouple |
| Knock sensor | 2 inputs |
| oxygen sensor | LSU 4.2, LSU 4.9 or Narrow band |
| Trigger inputs | 3 (primary, 2 cams) Hall/ VR software selectable |
| VSS | 1 (reverb / VR) |
| Flex fuel sensor | yes |
| Switch inputs | 3 inputs, switched to ground |
SENSORS | |
| Temperature sensors | IAT, CLT, Oil temperature, AC evap temperature |
| Pressure sensor | MAP, Oil pressure, Fuel pressure (user defined characteristic), AC pressure sensor, Back pressure |
| oxygen sensor | LSU 4.2 or 4.9 (built in controller), narrow band, external WBO controllers |
| speed | Vehicle speed sensor (VR/HALL), Gear sensor (sensor, calculated) |
FUEL | |
| injectors | Up to 8 HiZ injectors (sequential) |
| Injection angle control | 0-720 deg, start or end of injections |
| Battery compensation | User defined, wizard for popular injectors |
| Fueling strategies | VE based speed density, Alpha N |
| Air charge temp. | Based on IAT and CLT |
| VE table | 2 tables 16×20 (Load x RPM), resolution of 0.1% |
| Individual cylinder trim | yes |
| Staged injection | yes |
| Additional correction | Oxygen sensor corrections, EGT correction (per cylinder), BARO, TPS vs MAP, TPS vs RPM, Warmup, Nitrous, LC, ALS, ASE, Fuel pressure, Knock sensor |
| Lambda-based real-time correction | Using Lambda target table |
| Acc. / Deceleration enrichment | yes |
IGNITION | |
| Ignition outputs | 6 for passive and active coils (software selectable) |
| Supported triggers | N-1, N-2, N-3, N+1, Multitooth, Subaru triggers, Nissan trigger, Lotus Elise, Audi trigger, Renault Clio Williams / Alpine, Colt 1.5CZ, Wrangler |
| Ignition angle table | 2 tables 16×20 (Load x RPM), resolution of 0.5 deg |
| Per cylinder trim | yes |
| Dwell time battery compensation | Used defined, wizard for popular coils |
| Odd fire compatibility | Application dependent |
| Additional correction | CLT, IAT, TPS vs MAP, Nitrous, Idle, Knock sensor, LC, Pit limiter, ALS, Flat shift, Timers, Acc. enrichment |
KNOCK SENSING | |
| channels | 2 |
| resonant frequency range | 1-20kHz, 3rd order AAF |
| sampling | Ignition event driven, knock window |
| actions | Ignition retard, fuel enrichment, dashboard indication |
IDLE CONTROL | |
| Control type | PWM solenoids (2,3 wires), drive by wire, stepper motors (bi and unipolar), ignition cut, fuel cut |
| Control strategy | Open/close loop, ignition angle control |
| VE correction | Yes, for Alpha-N |
| corrections | AC clutch, coolant fan, analogue input |
BOOST CONTROL | |
| Boost ref and target tables | 2 sets 10×10 (TPS vs RPM) |
| Control strategies | Open/closed loop (PID based) |
| corrections | Gear, VSS, IAT, EGT |
DRIVE BY WIRE | |
| Control strategy | Advanced 3D PID + static friction compensation |
| Supported throttles | All with DC motor and current requirement lower than 6.5A Wizard for 28 popular electronic throttles |
| PPS to throttle position characteristic | 3D table |
| BLIP support | yes |
| AS support | yes |
TRACTION CONTROL | |
| TC strategy | Delta RPM, gear compensation |
| Torque reduction | Spark cut using 3D table (16×20) |
| Sensitivity control | 10 position rotary switch |
VARIABLE VALVE TIMING | |
| supported systems | VVTi, MiVec, VANOS, Double Vanos |
| Number of camshafts | 2 |
| Control strategy | PID based closed loop, CAM angle target tables 12×12 |
FLEX FUEL | |
| Ethanol content measurement | yes |
| Fuel temperature measurement | yes |
| Table blending | VE, IGN, Lambda/AFR, Boost, Cranking fuel, ASE, Warmup |
| Fuel temperature PW correction | yes |
SPORTS | |
| AS | 2 independent ALS setting, DBW support |
| Shift light | By gear shift light |
| Launch control | yes |
| Gear cut | Yes (open loop), DBW blip supported Source: switch, load cell, CAN |
| pit limiter | yes |
| Rolling anti lag | yes |
ENGINE PROTECTION | |
| Fail-safe values for critical sensors | yes |
| Dashboard indication of failures | Yes, user defined |
| Over temperature engine protection | Yes (oil and coolant), user defined, RPM limit |
| Low oil pressure protection | Yes, user defined, shut off |
| Fuel pressure protection | Yes, fuel dose compensation, RPM limit, engine shut off |
| High exhaust temperature | Alarm, per cylinder fuel trim, boost limit |
CANBUS | |
| CAN standard | 2.0B 125, 250, 500, 1000kbps |
| Supported CAN dashes | ECUMASTER, Motec M800 Set 1, Haltech E8 E11v2, Pectel SQ 6, AEM |
| Supported OEM CAN streams | BMW E46, Citroen C2, Mazda RX8, Ford ST, Polaris RZR, Mini Cooper R53, Fiat 500, Renault Clio, Lotus, Ford Fiesta, Ford ST, EVO X (AYC support) |
OTHER | |
| Unused injection outputs can be used as AUX output | yes |
| Output functions | Fuel pump, coolant fan, parametric outputs, nitrous control, PWM 3D table output, AC clutch, main relay, speedometer, tachometer |
| Password protection | Yes, 2 levels |
| timers | Fuel, ignition, boost, timers controlled by virtual outputs |
| Serial dashboard support | AIM, RaceTechnology |
| Auto tune | yes |
| Built in trigger scope | yes |
| logging | Real-time logging to PC computer, logging on external loggers (serial / CAN) |
